|
Sanitation
Chlorine & Bromine
Pool Shock
Pool Algaecides
Pool Balancers
Specialty Pool Chemicals
Other Pool Chemicals
Equipment
Automatic Cleaners
Pool Pumps
Pool Filters
Pool Heaters
Salt Systems
Chemical Feeders
Ladders and Rails
Lighting
Automation & Controls
Maintenance Equipment
Why Buy From Us
|
Metal Magic "basic" FOR SWIMMING POOLS
-Prevents and controls stain and scale formation -Metal Sequesterant
This product is specially designed to chelate complex minerals that naturally occur in some water supplies. Minerals, such as iron and manganese, can cause stains and discolored water. Water that has been pre-treated with tis product can avoid problems that can arise from the reaction of iron or manganese with subsequent additions of chlorine or shock treatment. This product is concentrated and ready to use. This product will not interfere with chlorine, algaecides, or stabilizers. Add seperately and do not mix with other chemicals. When used regularly, this product will help prevent scale build-up and mineral precipitation caused by other chemical additions.
Directions for use: To prevent discoloration of the pool water due to trace amounts of IRON, MANGANESE, and other heavy metals, add 1 1/2 ounces for each 1,000 gallons of pool water. This addition should be made before any other chemicals are added. Recirculate the water, to insure uniform distribution, before proceeding with other chemical additions. Discolored water: Determine if the discoloration is due to IRON or MANGANESE, if the water contains less than 1 ppm of these materials, add 1 1/2 ounces for each 1,000 gallons of pool water. If the water contains greater than 1 ppm, add proportionately greater amounts. Test the pH of the water, after addition, and adjust to 7.2-7.6, as necessary. Recirculate the water to insure uniform distribution. Scale Build-Up: Scale build-up is due to high levels of calcium and other hardness minerals. Add 3/4 ounce for each 1,000 gallons of pool water and recirculate for at least 6 hours after addition. To prevent a recurrence of scale build-up, add 1-2 ounces for each 5,000 gallons of pool water each week.
Metal Magic "green" FOR SWIMMING POOLS
-Compatible with all pool surfaces -After application, safe to swim immediately -100% natural and environmentally friendly -Eliminates & removes calcium scale -Extends salt cell life of chlorine generators
PROtech metal magic is a non-toxic, non-phosphorous formulation for control and prevention of scale and metal staining in swimming pools. When applied as directed, PROtech Metal Magic is compatible with all swimming pool surfaces and other treatment chemicals.
Directions For Use Initial Application: 1. Add 1 quart of PROtech Metal Magic by pouring into the skimmer or around the perimeter of the pool while cirulation pump is on. 2. This inital application may deplete the chlorine level in your pool. Following application, test the free available chlorine and adjust accordingly.
Maintenance Application: For Calcium Hardness Levels Less Than 300 ppm: -Add 6 ounces per 10,000 gallons of water once a month For Calcium Hardness Levels Greater Than 300 ppm: -Add 6 ounces per 10,000 gallons of water twice a month |
|
)
