|
General Equipment
Automatic Cleaners
Pool Pumps
Pool Filters
Pool Heaters
Salt Systems
Chemical Feeders
Ladders and Rails
Lighting
Automation & Controls
Maintenance Equipment
Winterizing Products
Anti-Vortex Drain Covers
Commercial Facilities
Commercial Construction
Commercial Pool Service
Commercial Pool Accounts
Commercial ADA Equipment
Commercial Automation
Commercial Cleaners
Commercial Controllers
Commercial Deck Equipment
Commercial Filters
Commercial Heating
Commercial Pumps
Commercial Sanitation
Chemical Sanitation
Chlorine & Bromine
Pool Shock
Pool Algaecides
Pool Balancers
Specialty Pool Chemicals
Other Pool Chemicals
Why Buy From Us
|
Metal Out Plus, 1 Qt. DescriptionPROtech Metal Out Plus 1 qt. Metal Out Plus For Swimming Pools
Controls iron staining and scale formation
Dissolved metals and minerals (such as iron, calcium, manganese and magnesium) in pool water and corrosion of metal pool fittings will often cause staining and/or scaling. Metal Out Plus is an aqueous solution of hydroxyethylidene-diphosphonic acid (HEDP) that is best used for metallic stain removal and prevention of hard water scaling. This product is used in swimming pools to reduce scale formation in pumps and pool heaters, to eliminate plugging of filters and to reduce iron staining. Soluble metals can be inhibited from precipitation by sequestering/chelating agents that bind with the colored metal ion to keep it in solution. Metal Out Plus sequesters the material causing stains and scale and holds them in solution. Regular use of this product helps keep pool water clear and the pool walls and plumbing in good condition. Use of Metal Out Plus as part of the pool maintenance program will result not only in the control of scale, but also in the removal of existing deposits. This product is also highly effective as a rust-control agent.
DIRECTIONS FOR USE
Maintain pool water in the pH range of 7.2 to 7.6, total alkalinity at 100 to 150 ppm and calcium hardness at 100 to 275 ppm. If pH falls below 7.0, serious corrosion problems may result. For best results, use Metal Out Plus in the evening with the pool pump and filter operating overnight. Add sixteen (16) ounces of Metal Out Plus per 10,000 gallons of water by premixing into plastic pail of water and then dispensing solution at deep end of the pool. Cloudiness accompanied by white flakes may appear indicating that the product is working, the cloudiness will eventually disappear.
MAINTENANCE TREATMENT
Follow all steps outlined above. Every 4-5 days, add two (2) ounces of Metal Out Plus per 10,000 gallons of pool water, to prevent stain and scale formation. Note: In hard water areas where calcium hardness exceeds 300 ppm, it is advisable to double the dosages listed above. However, DO NOT increase the dosages more than double for one application. Metal Out Plus, 1 Qt. ReviewsMetal Out Plus, 1 Qt. QuestionsThis feature is coming Soon! Until then, email us your question for a fast response! Email: sales@swimnsaveusa.com
Or call Toll-Free: 877-653-0365
|
|